FujiApple Rev 000 Development Kit for Apple II

Description

NOTE: This is a private listing only for Attendees at VCF East 2023. Items will not be shipped and you must pickup from the FujiNet table at the event

This is the third official FujiNet development board for the Apple II. The kit contains a FujiApple board with ESP32 preloaded with current firmware, an IDC20 Rainbow Ribbon Cable (30cm) and a DB19 to IDC20 adapter; all the hardware needed to get started developing with FujiNet on the Apple II.

This is not a finished product for the average end user. The FujiApple Rev000 is intended for those who wish experiment with their own applications or aid in FujiNet development. Firmware for the FujiApple is changing at a rapid pace and we are not releasing regular firmware builds for the easy flash tool. You may need to build the latest firmware from our codebase (instructions available on the wiki). We have released the design files in our Github hardware repo for those who wish to build their own board.

The FujiApple works on the SmartPort bus which is builtin to the IIc and newer Apple II machines. You can use it on the older Apple II machines (II Plus & IIe) by installing a DIYSmartPort ROM Card. More information is available in the Apple II FujiNet Quickstart Guide. There are issues using the FujiApple with IIgs ROM3 systems and we are currently working to figure them out so it should be considered unstable for these machines.

Disk II is in progress and support has been implemented for WOZ or DSK images.

Documentation is not available for all features but you can join the FujiNet Discord chat for assistance.