DB19 to IDC20 Adapter for Apple II
$15.00
This adapter is designed to fit the standard Apple II series DB-19 disk drive connector and an IDC20 floppy drive cable. It was designed to work with the Apple II FujiNet but could be used with other devices.
Out of stock
Description
This adapter is designed to fit the standard Apple II series DB-19 disk drive connector and an IDC20 floppy drive cable. It was designed to work with the Apple II FujiNet but could be used with other devices.
The +12V and -12V lines are disconnected by default but can be enabled with the 2 solder jumpers on board. Just apply a blob of solder on the pads to create the connection. The Drive 2 signal from the DB-19 side is broke out to a pad on board. The DB-19M connector is 3D printed in PLA.
Before using this with a device other than FujiNet, please verify the pinout of the device and compare it with the schematic provided.
Additional information
Weight | 2 oz |
---|